About this item:
Exhaust pipe with LED lights: after installation will have a racing flame spray effect, more cool at night, creative design can produce stunning visual effects, is a must for car modification enthusiasts!
High-quality materials: Fire-Breathing Tail Throat of high-quality stainless steel, not easy to rust, high temperature resistance, waterproof and dustproof, strong impact resistance, durable. The carbon fiber pattern shell is more fashionable and avant-garde.
Universal Fit Cars/Trucks: flexible sizes from 1.5″ to 2.4″ exhaust tailpipe can fit it. Fits most cars, SUVs, trucks, pickups, etc.Note: Please make sure the vehicle exhaust muffler tip is the right size before you buy!
Easy to install: no welding and drilling required, 3-bolt clamping design, just use a wrench to secure the screw lock to the proper position of the exhaust tailpipe. Separate wiring, equipped with fuses, without changing the wiring inside the vehicle.
Features:
*1. The product is made of high-strength stainless steel material, high temperature resistant, corrosion resistant and very durable.
*2. It can help reduce noise, remind the car behind to maintain a safe distance, prevent tailgating accidents, enhance vision when you reverse.
*3. Direct screw mounts with three pure steel M-shaped clamps at the end of the pipe, and the nut is thick and reinforced, which enhances the strength of the holder.
*4. High-temperature fire cap plays the roles of resisting high-temperature, back pressure, and enhancing power; and fire cap is connected to a spoiler, can play a certain role in muffling.
Characteristic:
General Motors tail tube
Durable material resistant to UV rays, water, dirt, grease, salt, weak acids and oils.
Lightweight and durable.
Easy to install, very suitable and high quality materials.
Blue LED / Red LED Upgrade Styles to Cool Your Car
Install on pc!
Please measure your car’s pipe size before ordering.
Specification:
Material: Aluminum Alloy + Carbon Fiber
Light Color: Red, Blue
Package includes:
1 x Car Exhaust Muffler Pipe
Thank you for your support! Welcome to buy from us! We guarantee the quality of our products.Welcome to visit. Hope you have a nice day!
It is very good material it is luxurious it is stainless steel
Great perfect quality and beautiful
I put my Nissan versa and it looks very elegant, a lot of friends have asked me where I bought it
I really like this led muffler it tool awhile to install but it very bright and lights up the exhaust gas
Great product!
Good product! Would buy again. Fast shipping!
Very realistic looking good quality. Reasonably priced.
These tips turn heads... I promise I am the only person I have ever seen with these
Great product that looks amazing on my s550 mustang
My camaro gets compliments all the time.
I recently did a muffler delete in my 2000 mercury cougar, and to be very honest... it sounded bad. I put in the rest of the pipes to put it past the back, and it sounded better, but still eh... put this on and holy crap it helped make it a lot less “farty.” If you’re looking for an inexpensive tip for a recent muffler delete this is a great choice!
I was very surprised at how substantial these were. They are thick well made and they secure tightly with there bolts. The fit extremly secure and they make no sound. It's a different style and my other but, might Venza has 20's and a 268 HP engine so why not. The chrome works with the accents on the car so I'll give them two thumbs up. For the price, they absolutely are the best call.
Bought this for my 1998 Mazda B3000 Pickup truck with cat back Flowmaster super 40. I wanted to buy this before I bought a weld on tip to see if it actually made a difference in sound. I was pleasantly surprised when it made the tone a deeper sound, not a whole lot, just enough to make it sound proper if that makes sense. When it comes to Vehicles of all walks of life, your exhaust is a key part of your vehicles personality, this product helps take the annoying sounds of your after market exhaust and make it sound alot more proper. Long story short, Bolts on Easy, Makes a small difference in sound to your exhaust but enough to make a difference. If you can hide the 10mm bolts that clamp it on it would look really clean. I'd suggest you buy a weld on tip if your going hard core so you can get the most out of your exhausts tips potential for sound. But, if your dont know how to weld, dont have the money to take it to get welded, or simply just want an easy car modification to improve your exhaust sound this is the product for you. And one last thing, Make sure your realize the dimensions of this tip, you dont want a bolt on tip that the same diameter of your exhausts or else it wont slip over. Triple check before you buy. I'm speaking from experience.
Works great to dress up the stock exhaust tip on my 2012 Mitsubishi Lancer. It was too long to use the resonated part but it made no difference in sound on my car, I did test it. I slid it almost all the way back to where the tip of my exhaust met the end of the muffler tip and it greatly improved the look of my exhaust tip. I took a chance and bought a scratch and dent special from Amazon, for $8 cheaper, and it still came in the factory package. The only difference was the bottom of the package had a slight tear and there was a very light scuff mark on the bottom of the muffler tip where no one will see it, so it was totally worth it.
Unless I was willing to cut some length off my pipe, I had to jerry rig this to make it work on my SR5. The end of the SR5 is 2 3/4" wide and although you can slip on this extension over it, you can only do so with only one of the washers on the inside. I literally installed this with a one bolt and washer. I just bought a stainless steel (so it wouldn't rust) nut of the same diameter, but the shortest I could buy (so it did not stick out obnoxiously), put it on the least visible side of the extension, and then used some Loctite Blue. Have had it on through the car wash and stayed on just fine. ALSO, I wanted the black version, but if you look at pictures the black comes off quickly. Even on this one, there are pictures of it rusting. Therefore, I sprayed some Rustoleum clear enamel on it to protect it. I think it is going to last a long time for me. I may periodically recoat it.
I put mine on a 2015 Silverado with a 5.7 liter engine. I had to loosen the clamps all the way, then it fit like a glove with no slack between the resonator and the stock tailpipe. If you are putting this on a car buy the smaller inside diameter version. I think the larger size is intended for trucks.
Great product my Toyota Highlander looks great and hot
The product looks very good and it’s made of a high quality materials. They make difference esthetically on my accord over the stock muffler tips.
I wish it was a little bigger for a truck exhaust. Now I have to cut my exhaust pipe so I can try and get this to fit onto it .
I absolutely love the product, it is beautiful and fast to install, and I recommend it to anyone who will buy it
It took me 5 minutes to install it, and as you see in the picture it looks amazing On my 2014 Honda Odyssey Ex-l I have to say Im very very impress with the quality is a good looking, and it gives the car a different look tbh, something small but very elegant, thank you for your business
Can't go wrong for the price. But, I ordered it after reading a response in Questions and Answers supplied by the manufacturer. They said it would fit 1.5" and up. The one I received was for 1.75". No problem, I just replaced the 3 bolts with slightly longer ones and it works fine! Again, beautifully manufactered and heavy duty for the price. And yes, it did mellow out the tone on my 1.1L Opel Kadett. The internal baffling is nice. My Kadett doesn't sound quite as much like a sewing machine as it did without it. I'd purchase it again!
I'm very pleased that with such a small investment, I could see those results.
Okay, these are cool as heck. My car comes stock with bare pipes even on higher trims, for some reason and these tips fixed that, improving the rear look drastically. Definitely bigger than I thought, yet not as big as a rice can, which is good! They also protrude quite a bit on my 2013 Impala, but it is exactly the look I was going for. If you want them deeper, it is possible to push them further in, although that might require cutting stuff depending on your car. I recently put a pair of Flowmaster mufflers on my car and these tips compliment the new throaty rumble, giving it a very muscular look that goes with it. Installing these took less than 10 minutes, although I recommend spending a few minutes properly aligning and securing the bolts.
This exhaust tip was easy to install: just tighten 3 bolts and you're good to go. I didn't weld it as I like to have the option to remove if needed or if I sell my vehicle. It made a very slight difference when it came to exhaust tone (slightly deeper) but the biggest impact is the looks. I didn't buy it for the sound anyways so it doesn't matter to me at all. Now my exhaust tip looks fat and its all chrome so it really shines. Love this product. for a small price it was a great visual improvement for me.